A high quality methanol designed to bring out the power in your motor. This product will improve combustion and increase flame speed allowing higher compression, thus increasing RPM, horsepower, and acceleration.

Super-charged and turbo-charged cars could eliminate the need for an intercooler, which makes the install of superchargers and turbochargers much easier. Methanol has a cooling effect like Super-chargers and turbo-chargers, produce higher air intake temperature due to the compressing of air. Methanol will lower the air intake temperature dramatically, much more cooling than an intercooler.
 

BESTCHEM Methanol permits the use of very high compression ratios. BESTCHEM Methanol acts as a cooling agent and increases volumetric efficiency and is widely use in turbocharged/supercharged engines reducing charge temperature after compression.

Directions: Injection with water/methanol mixture of 50/50 ratio is recommended. This has been demonstrated to be the best for charge/air cooling, excellent detonation control, and controlling cylinder temperature. Except when severe cold climate which requires higher mixtures for freeze protection.

Caution: At high concentration and injection rates, methanol can act more like a fuel than a coolant. As you increase the portion of methanol injected, you are releasing more energy into the cylinder as the combined gasoline and methanol burn. You will increase the cylinder temperature rather than reducing it. Beyond 50/50 ratio, onset of detonation is more likely.

*Note: Aquamist components will withstand methanol mixtures with water up to a 50/50 ratio (concentration) level. Stronger mixtures (methanol concentration above 50%) will swell various important gaskets/seals.
 

BESTCHEM Methanol itself has an octane number of 113 and has the main objective of reducing detonation. Not only does it improve your fuel quality, it will also give you a better intercooling effect in the inlet tract.

Directions: Mix to a maximum of 10% BESTCHEM Methanol to gasoline with the objective of increasing the octane rating, to reduce detonation under very high turbocharged/supercharged conditions. A 10% BESTCHEM Methanol proportion added to gasoline will give an Octane increase of about 5 points. For example: Add 5 liters of BESTCHEM Methanol for every 50 liters of 98 Octane gasoline can increased gasoline octane to 103.

Note: Each engine and its tuning is some what unique so you will need to experiment with it to find out what mixture and injection rate your turbocharged/supercharged system produces the most power with.
 

1. BESTCHEM Methanol is highly flammable; store it in a well-ventilated place.
2. It is better to dilute it with 50% water immediately before storing it.
3. Avoid prolong contact on Skin.
4. If contact, wash with water & soap.
5. When handling, use rubber gloves.

18 Litres tin
20 Litres vapour tight drum with RIEKE® FLEXSPOUT®
4 Litres jerry can